SARS-CoV-2 Antigen Detection Kit–Swab Antigen

Short Description:

Product Introduction:

It is suitable for the qualitative detection of novel coronavirus (SARS-COV-2) antigen in human nasal and throat swab samples to provide auxiliary diagnosis of patientswith suspected novel coronavirus (SARS-COV-2)infection.

Product characteristics:

1)Convenient operation:It can be used at home without any professional instruments or personnel.

2)The detected results can be shown with in15mins.

3)It can be stored at 4°C to 30°C,facilitating the transportation at room temperature.

4)High-qualityandhigh-affinitymonoclonal matched antibody pairs:The specificity ofthevirus can be detected.

5)The periodof validity for storage is up to 24 months.

Product specifications:

1 test/box、20 tests/box

①Pharyngeal / nasal swabs②Antigen detection cards③Antigen extract tube④Directions


  • Product name: SARS-CoV-2 Antigen Detection Kit--Swab Antigen
  • Type: Swab Antigen
  • Packing specification: 1 test/box、20 tests/box
  • Product Detail

    Product Tags

    Test principle:
    SARS-CoV-2 Antigen Detection Kit (Colloidal Gold Method) is used to detect the Nucleocapsid protein antigen of SARS-CoV-2 virus by double antibody sandwich method and immune lateral chromatography. If the sample contains SARS-CoV-2 virus antigen, both the test line (T) and the control line (C) will appear, and the result will be positive. If the sample does not contain SARS-CoV-2 antigen or no SARS-CoV-2 virus antigen is detected, the test line (T) will not appear. Only the control line (C) appears, and the result will be negative.

    Inspection method:
    It is important to read the Instructions for Use carefully and follow the steps in the correct order.
    1.Please use the kit at room temperature (15℃ ~ 30℃). If the kit was previously stored in a cool place (temperature lower than 15℃), please place it at room temperature for 30 minutes before use.
    2.Prepare a timer (such as watch or clock), paper towels, wash free hand sanitizer/soap and warm water and necessary protective equipment.
    3.Please read this Instructions for Use carefully and check the contents of the kit to ensure that there is no damage or breakage.
    4.Wash hands thoroughly (at least 20 seconds) with soap and warm water / rinse-free hand sanitizer. This step ensures that the kit is not contaminated, and then dry your hands.
    5.Take out the sample extraction tube, Tear open the sealing aluminum foil, and place the extraction tube on the support (attached to the box) to avoid liquid overflow
    6.Sample collection
    ① Open the package at the end of the swab rod and take out the swab.
    ②As shown in the figure, wipe both nostrils with a swab.
    (1) Insert the soft end of the swab into the nostril less than 1 inch (usually about 0.5 ~ 0.75 inch).
    (2) Gently rotate and wipe the nostrils with moderate force, at least five times.
    (3) Repeat another nostril sample with the same swab.
    7.Put the soft end of the swab into the extraction tube and immerse it in the liquid. Firmly stick the soft end of the swab to the inner wall of the extraction tube and rotate it clockwise or counterclockwise about 10 times. Squeeze the soft end of the swab along the inner wall of the extraction tube so that as much liquid as possible remains in the tube.
    8.Squeeze the swab over the head to remove the swab so as to remove as much liquid as possible from the swab. Dispose of swabs according to biohazard waste dispersal method.Screw the dropper onto the tube, press the Nozzle cap tightly onto the tube.
    9.Tear open the aluminum foil bag, take out the test card and place it horizontally on the platform.
    10.Gently squeeze the extraction tube, and add 2 drops of liquid vertically into the sample adding hole.
    11.Start timing and wait 10-15 minutes to interpret the results. Do not interpret the results 10 minutes ago or 15 minutes later.
    12.After the test, put all test components into biohazardous waste bag and dispose of remaining elements in the bag with regular household waste.
    13.Wash hands thoroughly (at least 20 seconds) with soap and warm water/hand sanitizer.








  • Previous:
  • Next:

  • Related Products